|
C.A.P. TEMPERATURE AMD
HUMIDITY CONTROLLERS
AIR-1 Temperature/Humidity Control
The AIR-1 allows you to
control the temperature and humidity within your growing
environment. Connect your ventilation equipment (air
conditioner, fan, etc.) to the exhaust outlet. Then set your
temperature and humidity to the level that you wish to maintain.
If either level is exceeded, the exhaust outlets are activated
to reduce heat and humidity.
AIR-2 Independent Temperature/Humidity Control
The AIR-2 has the same
features as the AIR-1 with the exception of separate temperature
and humidity outlets. This allows you to control the temperature
and humidity independently. Once you have connected your
temperature control device (air conditioner, fan, etc) and a
dehumidifier to the AIR-2, your desired temperature and humidity
are automatically maintained.
AIR-3 Temperature/Humidity/CO2 Control
The AIR-3 expands our line
of atmospheric controllers by providing the ability to
coordinate supplemental CO2 with your ventilation equipment. The
AIR-3's operation is similar to the AIR-1, with the addition of
a photo cell and CO2 outlets. The photo cell ensures that your
CO2 device (CO2 valve or generator) only activates when your
lights are on. To conserve CO2, the CO2 outlets are
automatically disabled while your ventilation equipment is
running.
AIR-4 Independent Temperature/Humidity/CO2 Control
The AIR-4 has all the
features of the AIR-3 with the addition of independent
temperature and humidity controls. It also has an increased
power capacity to control up to 15 amps of equipment. An
additional outlet is provided which will power equipment only
during the 'day' cycle. Features include independent temperature
and humidity control, coordinated CO2 sequencing and an
additional outlet that is powered only while the lights are on.
|
